Pool Control, Intermatic System Control, 80 Amp Load Center
Pool Control
Intermatic System Control PE34065RC
Suitable for pool equipment control and for direct connection to a wet-niche or no-niche luminaire. For indoor / outdoor use.
Many of today's energy-efficient pools and spas utilize the advantages of a single electrical panel, containing all the necessary controls for the safe, efficient and automatic operation of pool / spa equipment. This pool control can also be used to control any outdoor equipment, sign, or pump within its rated capacity.
The PC30000 Series Panel includes an eight-position 80 amp breaker base to accommodate a variety of different equipment loads and two mechanism slots to accommodate the vast array of mechanisms Intermatic has to offer. In addition, there is a low voltage raceway for low voltage control lines (i.e. actuators, sensors, etc.), four decor knockouts for GFCIs and switches, and a convenient side knockout for an outdoor receptacle.
A PE34065RC includes a P4043ME mechanism and two PE24VA actuators and remotely controls any pool and spa combination. With this addition, you can switch both water valves and heater thermostat settings between your pool and spa with a clock on your wireless control. These are by far the most affordable and versatile pool controls offered today!
Description: Wireless 5-Circuit Pool / Spa Control System with 80 Amp Breaker Base, Actuator Control and Two Actuators
Panel Rating: 80 Amp 120, 240 Vac or 120, 208 VAC Single Phase
Knockouts: One 1.09" diameter through hole, six combination 1/2"-3/4" knockouts, 2 combination 3/4", 1", 1-1/4" knockouts, four 1/2" knockouts on the bottom. Two combination 1/2"-3/4" knockouts on the left side and four combination 1/2"-3/4" knockouts, two combination 3/4"-1" on the back. One knockout 1-3/4" x 2-3/4" on the right side for mounting switches or GFCI.
Control Supply: 120, 240 VAC, 50/60 Hz, 5-Watts Maximum