Perfect for pool filters and spa / hot tub filters
Helps filters last longer and operate more efficiently
Suncoast Filter Renew liquid pool filter cleaner for swimming pools and spas is a heavy-duty liquid cleaner with concentrated acids and a grease-fighting formula that can be used on all types of filters to remove body oils, suntan lotions, organic materials, and minerals, helping your filter operate more efficiently and last longer. Regular use of Suncoast Filter Renew will assure proper filtration.
Perfect for swimming pool filters and spa / hot tub filters
Works on sand filters, cartridge filters, and DE filters
Cuts away grease, body oils, scale, and suntan lotion
Greatly improves filter life and efficiency
Regular use will assure proper filtration
Filter Renew Liquid Filter Cleaner Directions for Use
When preparing or using Filter Renew, take care not to splash, drip, or use it on surfaces such as ceramic tile, linoleum, formica brand counter surfaces, carpeting, etc., as etching or discoloration may occur. Suncoast Chemicals Filter Renew liquid filter cleaner is intended only for use as a pool filter cleaner.
Sand Filters: Turn off inlets and outlets for all pool chemical feeders. Close the main drain and place your pool filter in the backwash position. Slowly add one quart of Suncoast Filter Renew through the strainer while backwashing. Filter Renew can also be added through the sand fill port. Run your pool filter until the product begins to come out of the backwash water or until it is seen through a filter viewing cell. Soak the pool filter for eight to ten hours. After soaking, backwash the filter until the water comes out clean and the foam clears. Reverse the procedure and start normal filter operation. For sand filters containing more than 300 pounds of sand, add two quarts Filter Renew.
Cartridge Filters: Stop filter operation. Bleed off excess pressure through the pool filter safety valve. Open the filter unity, remove the cartridge from the filter, and rinse the excess loose dirt with a water hose from top to bottom. Place the cartridge in a bucket and add one quart Filter Renew/5 gallons water. Make sure the filter unit is completely covered by the cleaner. Soak for eight to ten hours. After soaking, rinse with the hose at maximum pressure to remove excess filter cleaner or until the foam residue is completely washed off. Reinstall the cartridge and resume normal filter operation.
DE Filters: Stop filter operation. Bleed off excess pressure through the safety valve. Remove pool filter elements (grids) from filter and rinse off excess dirt with a hose from top to bottom. Place the grids in a bucket and add one quart Filter Renew/5 gallons water. Make sure the grids are fully immersed in the cleaner. Soak for eight to ten hours. After soaking, rinse out excess filter cleaner with hose at maximum pressure. Reinstall the grid and add new filter media. Resume normal pool filter operation.
The Internet's #1 choice for discount swimming pool supplies, swimming pool chemicals, chlorine tablets, pool toys, pool filters, swimming pool pumps, automatic pool cleaners, pool heaters, above-ground swimming pools, pool cleaning supplies, and all other swimming pool accessories. Pinch A Penny® is a registered trademark of Pinch A Penny, Inc. All other indicated registered ® trademarks are the property of the respective owners and the use hereof does not imply their approval or endorsement of Pinch A Penny® products.