Suncoast Metal Control

Specially formulated to aid in the removal and prevention of copper stains in your pool

Suncoast Chemicals Metal Control is a specially formulated sequestrant that helps prevent and remove copper stains from swimming pools, as well as other minerals and metal deposits.  Metal Control works on all pool surfaces and when used regularly will help prevent new metal stains from forming. 

Suncoast Metal Control can also be used when treating black algae to help soften the hard outer shell which protects black algae cells.  

• Sequestrant for swimming pools

• Helps stop mineral and metal deposits

• Removes and prevents metal staining and rust

• Removes and prevents scale

• A must for heated pools

• Saves pool plumbing

• Also use with your black algae treatment to soften black algae's hard outer shell

Suncoast Chemicals Metal Control Directions for Use

Add one quart of Suncoast Metal Control per 6,500 gallons of pool water.  In problem water areas, two quarts or more may be required per 6,500 gallons.  Ideally, Metal Control should be diluted in a bucket of water and added to a circulating pool.  When using Metal Control for topicals in pool stain identification, it should not be diluted.  Metal Control should be used when treating black algae to help soften and remove the hard outer shells which protect black algae shells. 

Normal maintenance levels for Suncoast Chemicals Metal Control are 10-12 ppm for scale and stain removal.  It is important to monitor these levels in order to prevent staining in new and older pools.  Metal Control levels are depleted as the product does its job.  Your pool may require more or less Metal Control depending on the amount of contaminants in your pool.  Adding 1 1/2 ounces will raise the Metal Control level 1 ppm in 6,500 gallons of pool water.  Have a sequest test performed.  Metal Control is formulated to aid in the removal of stains on all pool surfaces and, when used on a regular basis, to help prevent new stains from occurring. Suncoast Chemicals Metal Control is designed to work under normal water balance conditions and a Total Dissolved Solids (TDS) level below 1200 ppm.  With a TDS above 1200 ppm. you should use Suncoast Chemicals Ultimate Metal Control Plus Salt Solution.