Suncoast Chemicals Stop Green

Suncoast Chemicals Stop Green
Item # Item Description Price Qty
00921304 Stop Green 2lbs Pool Algae $17.99

Suncoast Stop Green

  • Produces remarkable pool cleaning results

  • Use before adding your EPA-registered chlorine which rids your pool of green, yellow, brown, and pink algae

  • No brushing required

Directions for Use

  1. Turn on pool filter pump before application to circulate the water.

  2. Shake well to break up the lumps (product lumping in transit is normal). Adjust the pool chemical balance to: 7.8 or higher for pH, 80-120 ppm for alkalinity, 25-75 ppm for cyanuric acid, and 2.0-2.5 ppm for chlorine.

  3. Add 2 lbs. of Stop Green directly to the pool per 15,000 gallons of water. Spread half of along the perimeter of the pool, starting where the algae is thickest. Concentrate the balance of the application directly over the problem areas. Never add more than the recommended dose.

  4. Wait 5 minutes. Then add 2.5 gallons of liquid chlorinating solution or 2 pounds granular shock directly to the pool per 15,000 gallons of water.

  5. Circulate the pool water continuously for 24 hours using only the main drain, if possible. Repeat Step 4 by adding additional chlorine after 12 and 24 hours. Wait 24 hours before swimming.

  6. Restore equipment and pool chemical balance to normal after the pool is clean.

  7. Begin following a weekly maintenance dose of an all-purpose algaecide.